30KW CNC Horizontal Machining Center Lathe 3 Speed 30-1300rpm Milling
1300rpm CNC Horizontal Machining Center
,30KW CNC Horizontal Machining Center
,1300rpm horizontal milling center
- Max. swing over bed: Φ630mm
- Max. turning diameter over cross slide: Φ400mm
- Max. workpiece length / turning length: 2000mm / 1750mm
- Bed width: 500mm (double peaked guideways)
- Spindle nose type: A2-11 with 1:20 taper
- Standard chuck: Φ630mm 3-jaw
- Spindle bore: Φ100mm
- Spindle speed range: 30~1300 rpm (3-speed electric gearbox)
- Spindle motor: 11kW servo motor
- 1 Year Warranty
The SDVEDON CSK6163×2000 is an economic horizontal CNC lathe designed for roughing and finishing of mechanical parts, particularly suited for high-efficiency, high-volume, high-precision machining of rotational components in automotive,machinery, and general manufacturing industries.
Robust & Rigid Construction - Floor-mounted bed with double-peak guideways and 500mm width provides exceptional rigidity and vibration damping for heavy cuts. High-strength cast iron construction with proper aging treatment ensures long-term geometric accuracy.
Powerful Spindle System - A2-11 spindle nose with 1:20 taper, Φ100mm spindle bore, and 3-speed electric gearbox with stepless adjustment (30-1300 rpm). High-precision bearings ensure rotational runout ≤0.01mm.
Precision Drive System - X and Z axes utilize high-quality ball screws with 0.001mm minimum input increment. Positioning accuracy and repeatability of 0.01mm achieve IT7 grade machining accuracy.
User-Friendly Operation - GSK980TBi CNC system with full servo control, electronic handwheel, and intuitive programming. Vertical 4-station electric tool post with automatic tool selection.
| Parameter | Unit | CSK6163×2000 |
|---|---|---|
| Machining Range | ||
| Max. swing over bed | mm | Φ630 |
| Max. turning diameter over cross slide | mm | Φ400 |
| Max. workpiece length | mm | 2000 |
| Max. turning length | mm | 1750 |
| Bed width | mm | 500 (double peaked) |
| Spindle | ||
| Spindle nose type | A2-11 | |
| Spindle nose taper | 1:20 | |
| Standard chuck | mm | Φ630 3-jaw |
| Spindle bore | mm | Φ100 |
| Spindle speed range | rpm | 30~1300 (3-speed electric) |
| Spindle motor | kW | 11 servo |
| Spindle runout | mm | ≤0.01 |
| Axes | ||
| X-axis travel | mm | 425 |
| Z-axis travel | mm | 1350 |
| X/Z rapid traverse | m/min | 4 / 6 |
| X/Z positioning accuracy | mm | 0.01 / 0.01 |
| X/Z repeatability | mm | 0.01 / 0.01 |
| X/Z min. input increment | mm | 0.001 / 0.001 |
| X ball screw | mm | Φ32 (Nanjing Technology Works) |
| Z ball screw | mm | Φ50 (Nanjing Technology Works) |
| X/Z servo torque | Nm | 15 / 15 (Z with 1:3 gearbox) |
Widely used in automotive parts manufacturing (shafts, axles, hubs),components, general machinery, hydraulic equipment, oil and gas industry, and heavy equipment repair. Suitable for turning external and internal cylindrical surfaces, tapers, threads, drilling, reaming, and machining curved rotational parts on steel, cast iron, and non-ferrous materials.
- Read the instruction manual thoroughly before operation
- Always wear safety goggles and appropriate protective clothing
- Securely clamp the workpiece and ensure the chuck is properly tightened
- Do not exceed the maximum swing or turning length specifications
- Disconnect power before cleaning, maintenance, or adjusting components
- Check the automatic lubrication system oil level regularly
- Use appropriate cutting fluid for extended tool life and better surface finish
- When using the CNC-controlled tailstock, verify program settings before automatic operation
- 1-year warranty covers bearings, guideways, ball screws, main motor, and CNC system
